HOT WORKING TOOL STEELS - Hitachi Metals

High-toughness matrix high speed steel for hot-working tools, and excellent wear resistance and crack resistance. Can withstand high-temperature loads such as in warm-and hot-working precision forging dies. Tool steel for hammer dies. Free-cutting hot-working tool steel. Grade YSS JIS equivalent Applications Features Hot forging dies, What kind of steel is used in a hot working press?What kind of steel is used in a hot working press?General-purpose hot-working tool steel used in a wide range of applications. A hot-working tool steel which has improved hardenability and greater toughness than DAC, and helps avoid cracking in hot- working press dies, high-hardened Al extrusion dies.HOT WORKING TOOL STEELS - Hitachi Metals What should the hardness of a hot work tool be?What should the hardness of a hot work tool be?Heat at a rate not exceeding 222 per hour to 732-788, and hold at temperature for 1 hour per inch of maximum thickness,2 hours minimum, then cool slowly with the furnace at a rate not exceeding 28 per hour to 538. continue cooling to ambient temperature in the furnace or in air, the resultant hardness should be a maximum of 235HBW.DIN 1.2367, hot work tool steel,similar to AISI H11,but 12367 Hot Work Tool and Mould Steel

1 2367 hot work tool and mould steel

Jun 12, 2020Jun 12, 2020Die Steel, Tool Steel, Steel Plate manufacturer / supplier in China, offering 1.2311 P20 Hot Work Mould Steel Bar, Steel C55 1055 1.0535 S55c Bar or Rod for Project, Steel C55 1055 1.0535 S55c Sheet or Plate for Project and so on. Get Price; Plastic Mould Steel, Hot and Cold Work Tool Steel from 12367 Hot Work Tool and Mould Steel1 2367 hot work tool and mould steelJun 12, 2020Jun 12, 2020Die Steel, Tool Steel, Steel Plate manufacturer / supplier in China, offering 1.2311 P20 Hot Work Mould Steel Bar, Steel C55 1055 1.0535 S55c Bar or Rod for Project, Steel C55 1055 1.0535 S55c Sheet or Plate for Project and so on. Get Price; Plastic Mould Steel, Hot and Cold Work Tool Steel from 12367 Hot Work Tool and Mould SteelAISI H13 1.2344 SKD61 Hot Work Mould Steel BarAISI H13 steel is the most popular and most versatile, hot work mould steel, providing a good balance of toughness, heat check resistance, and high temperature strength, in addition to moderate wear resistance. H13 steel can resist softening to 550°C and has good resistance to heat checking. Will Nitride with a case hardness over 1000 V.P.N.

AISI H13 1.2344 SKD61 Hot Work Mould Steel Bar

AISI H13 steel is the most popular and most versatile, hot work mould steel, providing a good balance of toughness, heat check resistance, and high temperature strength, in addition to moderate wear resistance. H13 steel can resist softening to 550°C and has good resistance to heat checking. Will Nitride with a case hardness over 1000 V.P.N.Birlesik Metal Special Alloys / 12367Hot work tool steel with 10% cobalt. Even 700 C it saves 48HRC. 1.2378 Instead of 1.2080 and 1.2379 Very well wear resistance. Brick ceramic moulds. Powder pressing moulds. 1.2965 Hot and cold work tooling Very well toughness and wear resistance, be able to reach 64 HRC.Birlesik Metal Special Alloys / 12367Hot work tool steel with 10% cobalt. Even 700 C it saves 48HRC. 1.2378 Instead of 1.2080 and 1.2379 Very well wear resistance. Brick ceramic moulds. Powder pressing moulds. 1.2965 Hot and cold work tooling Very well toughness and wear resistance, be able to reach 64 HRC.

Birlesik Metal Special Alloys / 12367

Hot work tool steel with 10% cobalt. Even 700 C it saves 48HRC. 1.2378 Instead of 1.2080 and 1.2379 Very well wear resistance. Brick ceramic moulds. Powder pressing moulds. 1.2965 Hot and cold work tooling Very well toughness and wear resistance, be able to reach 64 HRC.Birlesik Metal Special Alloys / Materials / 1.23671.2367 is hot work tool steel which can maintain its hardness even at high temperature. Applications It is used in injection molds of materials such as copper and brass, and in welding reels of mold cores.China 1.2367 Hot Work Tool and Mould Steel China 1.2367 Hot Work Tool and Mould Steel X38crmov5-3, Find details about China Tool Steel, Mould Steel from 1.2367 Hot Work Tool and Mould Steel X38crmov5-3 - Dongguan Kasen Steel

China 1.2367 Hot Work Tool and Mould Steel X38crmov5

China 1.2367 Hot Work Tool and Mould Steel X38crmov5-3, Find details about China Tool Steel, Mould Steel from 1.2367 Hot Work Tool and Mould Steel X38crmov5-3 - Dongguan Kasen Steel China 1.2367 Hot Work Tool and Mould Steel X38crmov5 China 1.2367 Hot Work Tool and Mould Steel X38crmov5-3, Find details about China Tool Steel, Mould Steel from 1.2367 Hot Work Tool and Mould Steel X38crmov5-3 - Dongguan Kasen Steel Cold Work Tool Steel, Round Bars, Cold Work Tool Steel 12367 Hot Work Tool and Mould SteelCold work tool steel includes die for making punching ( blanking punching die, trimming die, punch, scissors ), cold heading die and cold extrusion die, bending and drawing die, etc. 1.2767 Cold Work Tool Steel Plates / Bars / Sheet / Forgings. Inquire Now. D2 / 1.2379 / Skd11 Tool Steel/Alloy Steel/Die Steel/ round bars for mask mold (80/85/90 12367 Hot Work Tool and Mould Steel

Cold Work Tool Steel, Round Bars, Cold Work Tool Steel 12367 Hot Work Tool and Mould Steel

Cold work tool steel includes die for making punching ( blanking punching die, trimming die, punch, scissors ), cold heading die and cold extrusion die, bending and drawing die, etc. 1.2767 Cold Work Tool Steel Plates / Bars / Sheet / Forgings. Inquire Now. D2 / 1.2379 / Skd11 Tool Steel/Alloy Steel/Die Steel/ round bars for mask mold (80/85/90 12367 Hot Work Tool and Mould SteelDIN 1.2367, hot work tool steel,similar to AISI H11,but 12367 Hot Work Tool and Mould SteelBasic information about DIN 1.2367. 1.2367 is a choromium -Molybdenum hot work steel that is similar to AISI H11 hot work steel, but which contains a higher molybdenum content, The higher molybdenum gives DIN 1.2367 better hot hardness and temper resistance,along with higher attainable hardness and deeper hardenability than the more common H11 and H13 hot work steels, Typical DIN 1.2367, hot work tool steel,similar to AISI H11,but 12367 Hot Work Tool and Mould SteelBasic information about DIN 1.2367. 1.2367 is a choromium -Molybdenum hot work steel that is similar to AISI H11 hot work steel, but which contains a higher molybdenum content, The higher molybdenum gives DIN 1.2367 better hot hardness and temper resistance,along with higher attainable hardness and deeper hardenability than the more common H11 and H13 hot work steels, Typical applications 12367 Hot Work Tool and Mould Steel

DIN 1.2367, hot work tool steel,similar to AISI H11,but 12367 Hot Work Tool and Mould Steel

Basic information about DIN 1.2367. 1.2367 is a choromium -Molybdenum hot work steel that is similar to AISI H11 hot work steel, but which contains a higher molybdenum content, The higher molybdenum gives DIN 1.2367 better hot hardness and temper resistance,along with higher attainable hardness and deeper hardenability than the more common H11 and H13 hot work steels, Typical applications 12367 Hot Work Tool and Mould SteelDin 1.2344 / SKD61 / H13 Hot Work Tool Steel Plate for mouldH13 die steel is used to manufacture forging dies, hot extrusion dies, precision forging dies with large impact loads, and die casting dies for aluminum, copper and their alloys. H13 Tool Steel is a versatile chromium-molybdenum hot work steel that is widely used in hot work and cold work Din 1.2344 / SKD61 / H13 Hot Work Tool Steel Plate for mouldH13 die steel is used to manufacture forging dies, hot extrusion dies, precision forging dies with large impact loads, and die casting dies for aluminum, copper and their alloys. H13 Tool Steel is a versatile chromium-molybdenum hot work steel that is widely used in hot work and cold work

2 minsImages of 12367 Hot Work Tool and Mould Steel

imagesMaterial 1.2367 - Basedo SteelThe tool steel 1.2367 is a hot-work steel with high wear resistance, good heat resistance and good resistance tempering. 1.2367 can be well cured. Frequently the material is used in the production of large die casting. Usually 1.2367 is delivered in the soft annealed condition.Forged ESR Hot Work Die Steel Mould Steel Tool Steel 1 12367 Hot Work Tool and Mould SteelForged ESR Hot Work Die Steel Mould Steel Tool Steel 1.2344 H13 SKD61. 1. Definition 1.2344/H13/SKD61 steel is a pressure resistant hot work die steel. The steel is remelted by electroslag, uniform in material, good in hardenability, excellent in machinability and polishing performance, high toughness and plasticity, good high and low 12367 Hot Work Tool and Mould SteelForged ESR Hot Work Die Steel Mould Steel Tool Steel 1 12367 Hot Work Tool and Mould SteelForged ESR Hot Work Die Steel Mould Steel Tool Steel 1.2344 H13 SKD61. 1. Definition 1.2344/H13/SKD61 steel is a pressure resistant hot work die steel. The steel is remelted by electroslag, uniform in material, good in hardenability, excellent in machinability and polishing performance, high toughness and plasticity, good high and low 12367 Hot Work Tool and Mould Steel

Hardened DIN 1.2083H 420H S136H Mould Steel Sheet

Hardened Tool Steel DIN 1.2083H 420H S136H Plastic Alloy Tool Mould Steel Plate. S136H is a plastic mould steel with excellent corrosion resistance, excellent production characteristics, high precision steel polishing, excellent corrosion resistance, heat treatment less deformation. Grades Compari.Hardened DIN 1.2083H 420H S136H Mould Steel SheetHardened Tool Steel DIN 1.2083H 420H S136H Plastic Alloy Tool Mould Steel Plate. S136H is a plastic mould steel with excellent corrosion resistance, excellent production characteristics, high precision steel polishing, excellent corrosion resistance, heat treatment less deformation. Grades Compari.Hot Rolled S50C Steel Mold Base In 12367 Hot Work Tool and Mould Steel - Hot Work Tool Hot Work Tool Steel. 1.2344 SKD61 H13 Tool Steel Die - Casting Forged Thermal Cracking Resistance. High Isotropy Hot Rolled Steel Bar SKD61 / 4Cr5MoSiV1 Flat Bar 51 - 55HRC Hardness. 1.2344 / H13 / SKD61 Die-casting Hot Work Special Tool Flat Steel. Forged Tooling L6 Tool Steel SKT4 / 1.2713 Proper Hardness For Large Molds. Cold Work Tool Steel

Low-Cycle Fatigue of DIN 1.2367 Steels in Various 12367 Hot Work Tool and Mould Steel

The higher molybdenum content gives DIN 1.2367 better hot hardness and temper resistance compared to similar-type AISI H11 and H13 tool steels. The steel DIN 1.2367 has become of increasing 12367 Hot Work Tool and Mould SteelLow-Cycle Fatigue of DIN 1.2367 Steels in Various 12367 Hot Work Tool and Mould SteelThe higher molybdenum content gives DIN 1.2367 better hot hardness and temper resistance compared to similar-type AISI H11 and H13 tool steels. The steel DIN 1.2367 has become of increasing 12367 Hot Work Tool and Mould SteelPeople also askHow is tempering required for hot work tool steel?How is tempering required for hot work tool steel?For salt maintained at 538-593, equalize in the salt, then cool in still air to 66-51, Tempering Temper immediately after quenching, Typical temperature range is 538-593, do not temper below 538, hold at temperature for 2 hours then air cool to ambient temperature, double tempering is requiredDIN 1.2367, hot work tool steel,similar to AISI H11,but 12367 Hot Work Tool and Mould Steel

k340 tool steel equivalentshitachi metals inchitachi metals newsh13 tool steelh13 tool steel spech13 tool steel tensile strengthSteels for Moulds, Tools and Dies - Industeel

Tenasteel is a cold work tool steel, combining a high compression strength and a very good toughness. Its other advantages are a particularly high resistance to thermal softening and a good machinability in the asdelivery condition. The steel is delivered in the soft Premium 1.2367 - Abrams Industries EUHot work steel with excellent toughness, excellent heat resistance and excellent tempering resistance. 12367 Hot Work Tool and Mould Steel die inserts, extrusion presses, hot extrusion tools, die casting tools, slides, press mandrels, intermediate sleeves, die holders, profiling dies, profile mandrels, block receivers, hot shear knives, light metal processing, plastic moulds. 12367 Hot Work Tool and Mould SteelPremium 1.2367 - Abrams Industries EUHot work steel with excellent toughness, excellent heat resistance and excellent tempering resistance. 12367 Hot Work Tool and Mould Steel die inserts, extrusion presses, hot extrusion tools, die casting tools, slides, press mandrels, intermediate sleeves, die holders, profiling dies, profile mandrels, block receivers, hot shear knives, light metal processing, plastic moulds. 12367 Hot Work Tool and Mould Steel

Premium 1.2367 - Abrams Industries EU

Hot work steel with excellent toughness, excellent heat resistance and excellent tempering resistance. 12367 Hot Work Tool and Mould Steel die inserts, extrusion presses, hot extrusion tools, die casting tools, slides, press mandrels, intermediate sleeves, die holders, profiling dies, profile mandrels, block receivers, hot shear knives, light metal processing, plastic moulds. 12367 Hot Work Tool and Mould SteelQuality Mold Tool Steel Cold Work Tool Steel factory 12367 Hot Work Tool and Mould SteelForged P20+NI / 718H / 1.2738 Mold Tool Steel Block Wear Resistant. Dia20mm P20 / 1.2311 / 3CR2MO Plastic Mold Steel Round Bar. Hot Work Tool Steel. High Wear Resistance Forged Block SKT4 Hot Work Tool Steel. Brush Machine Spare Parts 300mm H13 Tool Steel Block. SKD61 Steel Round Bar. Din 1.2344 / SKD61 / H13 Hot Work Tool Steel Plate for mould 12367 Hot Work Tool and Mould SteelQuality Mold Tool Steel Cold Work Tool Steel factory 12367 Hot Work Tool and Mould SteelForged P20+NI / 718H / 1.2738 Mold Tool Steel Block Wear Resistant. Dia20mm P20 / 1.2311 / 3CR2MO Plastic Mold Steel Round Bar. Hot Work Tool Steel. High Wear Resistance Forged Block SKT4 Hot Work Tool Steel. Brush Machine Spare Parts 300mm H13 Tool Steel Block. SKD61 Steel Round Bar. Din 1.2344 / SKD61 / H13 Hot Work Tool Steel Plate for mould 12367 Hot Work Tool and Mould Steel

S50C Mold Base For Injection Mold 12367 Hot Work Tool and Mould Steel - Hot Work Tool

1.Grade S50C carbon steel is use for making injection plastic mould, mould frame and some mid-range machine. 2.Grade S50C carbon steel is widely used in construction, bridges, electricity station, ship building, boiler, and so on, alloy steel plate also can be made according to the customers required. 3.For plastic moulds, cold work die and mould base as well as constructional part.Birlesik Metal Special Alloys / Materials / 1.23671.2367 is hot work tool steel which can maintain its hardness even at high temperature. Applications It is used in injection molds of materials such as copper and brass, and in welding reels of mold cores.

Birlesik Metal Special Alloys / Materials / 1.2367

1.2367 is hot work tool steel which can maintain its hardness even at high temperature. Applications It is used in injection molds of materials such as copper and brass, and in welding reels of mold cores.Steels for Moulds, Tools and Dies - IndusteelTenasteel is a cold work tool steel, combining a high compression strength and a very good toughness. Its other advantages are a particularly high resistance to thermal softening and a good machinability in the asdelivery condition. The steel is delivered in the soft Steels for Moulds, Tools and Dies - IndusteelTenasteel is a cold work tool steel, combining a high compression strength and a very good toughness. Its other advantages are a particularly high resistance to thermal softening and a good machinability in the asdelivery condition. The steel is delivered in the soft

    Leava a Message: